Scan New Eva LUN’s and Add Present To OSPosted: June 24, 2010
After LUN’s are presented to the Linux server, you must rescan the Fibre Fabric so that the disks can be seen by Linux.
The disk then has to be formated and mounted.
OS : cat /etc/*-release Red Hat Enterprise Linux AS release 4 (Nahant Update 7)
SAN : HP EVA4400
Server : HP BL480c with QLogic Fibre Cards
Scan The Fabric
This operation can vary depending on the ammount of LUN’s presented. If possible do this out of hours or in quiet preiods.
See Format Disks for the Linux command to add the disk